9
Mounting the Holder
For storage, insert the Pipette
Controller in the wall holder.
Mounting options:
1. The magnetized holder will
grip a metal surface to provide
support for the instrument.
2. Wall mount the holder with
screws.
Using the Stand
For charging, place the Pipette Controller in the stand with the
connector inserted in the stand. A pipette can stay inserted within the
controller within the stand during charging. Do not place near doors or
the edge of benchtop.
Changing the AC Adapter Plug Type
1.
2.
Press tab
Press
tab
Remove
To Next Page
Loading...
