Need help?Do you have a question about the Heaven Fresh HF 380 and is the answer not in the manual?
General| Ionizer | Yes |
|---|---|
| Air purify rate | 180 m³/h |
| Number of speeds | 5 |
| Timer duration (maximum) | 8 h |
| Suitable for room area up to | 60.4 m² |
| Suitable for room volume up to | - m³ |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 80 W |
| Product color | - |
| Buttons quantity | 3 |
| Filter life (max) | 24 month(s) |
| Filtering capability | Cigarette smoke, Fine dust, Microbes, Pollen, Viruses |
| Number of filter stages | 7 |
Weight and Dimensions| Depth | 254 mm |
|---|---|
| Width | 343 mm |
| Height | 610 mm |
| Weight | 6800 g |
Highlights crucial safety precautions, including voltage, moisture, dismantling, and usage environment warnings.
Identifies visible external parts like air inlets, outlets, and sensors from the front.
Details the control panel interface, including indicators, buttons, and sensors.
Illustrates the back handle, air outlet, and internal components like filters and UV lamp.
Steps to optimize clean air sensor accuracy by ensuring proper ventilation and resetting the unit.
Explains the function of Negative Ion, Odour, Dust, and Air Quality Surveillance indicators.
Guidance on powering the unit on/off, selecting fan modes (Quiet, Low, Med, High, Auto).
Instructions for using automatic operation based on air quality and setting the timer duration.
Step-by-step instructions for safely disassembling the air purifier for cleaning.
Details on cleaning the dust sensor cover, TiO2 filter, HEPA filter, prefilter, and front cover.
Instructions for cleaning the plasma dust collector, including when to clean and how to remove it.
Guidance on replacing filters and the UV lamp, including lifespan and replacement procedures.
Steps to reset the 'Clean Metal Grid' and 'Replace Filter' indicators after maintenance.
Detailed steps for cleaning the dust and irritant sensor, including disassembly and reassembly.
Answers common questions about the Clean Air Monitor, including LED behavior and sensor sensitivity.
Addresses blinking sensors, non-responsive odour sensors, and filter effectiveness issues.
Troubleshooting common problems related to the plasma dust collector and the unit not turning on.
Lists detailed technical data including model, voltage, power, dimensions, weight, and coverage area.
Form to fill out for warranty claims, including purchase date, customer, and seller information.
Details what is covered under the warranty, duration, exclusions, and customer support contact.
To Next Page
