Need help?Do you have a question about the HEIDELBERG Wallbox Energy Control and is the answer not in the manual?
General| Charging Power | up to 11 kW |
|---|---|
| Connector Type | Type 2 |
| Current | 16 A |
| Cable Length | 5 m |
| Protection Class | IP54 |
| Operating Temperature | -25°C to +50°C |
| Charging Modes | Mode 3 |
| Communication | Ethernet |
| Input Voltage | 230/400 V AC |
Essential safety instructions to follow before installing and starting up the Wallbox.
Conditions and requirements that must be met before proceeding with the installation of the Wallbox.
Key points for trouble-free installation and start-up, covering assembly, connection, and settings.
Details the components included in the Wallbox package and its separate accessory bags.
Instructions and guidelines for securely mounting the Wallbox onto a wall surface.
Steps and considerations for installing the Wallbox when mounted on a dedicated column.
Detailed instructions for connecting the Wallbox to the power supply and wiring.
Procedure for powering up, connecting a vehicle, and verifying the Wallbox operation.
Contact details for customer support, including hotline, email, and website.
Information regarding the proper disposal of the Wallbox and its packaging according to regulations.
To Next Page
