Heil Sound Pro Set Elite iC User Manual

N
N
C
C
S
S
-
-
E
E
3
3
2
2
6
6
H
H
e
e
i
i
l
l
S
S
o
o
u
u
n
n
d
d
P
P
R
R
O
O
S
S
E
E
T
T
E
E
L
L
I
I
T
T
E
E
i
i
C
C
H
H
e
e
a
a
d
d
s
s
e
e
t
t
New Communications Solutions, LLC
Norcross, Georgia
TEL/FAX: (888) 883-5788
EMAIL: support@ncsradio.com
Website: www.
ncsradio.com
Using the
Pro Set
Elite
iC
with the NCS
-
C003 Headset Interface Box
To connect the Pro Set Elite iC to the NCS-C003 Headset Interface Box requires the NCS-003-
HHS-0.7 Headset Adaptor Cable. The two Pro Set Elite iC 3.5 mm phone plugs connect to their
respective jacks on the Headset Adaptor Cable. Make sure that the color of the plug and jack
match. The optional NCS-F230 Hand Switch is connected directly to the ¼ inch phone jack on
the front of the NCS-C003.
NCS-003-HHS-0.7 Headset Adaptor Cable
Installation of Microphone Jumpers in the NCS-C250
Microphone jumpers must be installed in the NCS-C250 to match the pin outs of the NCS-C003
Headset Interface Box. The proper installation of the mic jumpers for use with the NCS-C003
and adaptor cable is shown below. After all jumpers are installed refer to the NCS-C250
Instruction Manual and set the mic audio level for proper audio output.
The Sel Audio and Unsel Audio jumpers can be swapped to reverse the audio in the headset
earpieces.
To NCS-C003
PTT
NCS-F230
Hand Switch
Receive Audio
Mic Audio
To NCS-C003
Push connector to engage
Pull Release Ring Back
to Unplug Connector
Line Up the WHITE DOT with the WHITE DOT on
the Mating Connector Before Engaging
Red = Mic Audio
Mic Audio
PTT
Ground
Unsel
Audio
AUXV
Sel
Audio
1 2 3 4 5 6 7 8
5V 12V
AUXV
Electret Voltage
Jumper

Heil Sound Pro Set Elite iC Specifications

General

Brand	Heil Sound
Model	Pro Set Elite iC
Category	Headsets
Language	English

Summary

Using Pro Set Elite iC with NCS-C003 Headset Interface Box

NCS-003-HHS-0.7 Headset Adaptor Cable

Details the NCS-003-HHS-0.7 Headset Adaptor Cable for connecting the headset to the NCS-C003.

Microphone Jumper Installation for NCS-C250

Guides on installing microphone jumpers in the NCS-C250 to match NCS-C003 pin outs.

Product Features and Mechanical Adjustments

Microphone Element Details

Details the electret microphone element and its wide frequency response for clear voice articulation.

Pro Set Elite iC Termination and Connections

Microphone Audio Termination

Explains the 3.5 mm mono phone plug with a red band for microphone audio.

Earpiece Audio Termination

Explains the 3.5 mm stereo phone plug for earpiece audio.

Using Pro Set Elite iC with NCS-C250 Mobile Multi-Switcher

NCS-250-HHS-216 Headset Adaptor Cable

Details the NCS-250-HHS-216 Headset Adaptor Cable for connecting the headset to the NCS-C250.

Microphone Jumper Installation for NCS-C250

Guides on installing mic jumpers in NCS-C250 for NCS-250-HHS-216 cable.

Speaker Phase Reversal Switch Function