To Next PageTo Next Page
Need help?Do you have a question about the HEIN-WERNER AUTOMOTIVE HW93503 and is the answer not in the manual?
General| Brand | HEIN-WERNER AUTOMOTIVE |
|---|---|
| Model | HW93503 |
| Category | Jacks |
| Language | English |
Details the purpose and usage limitations of Hein-Werner Jack Stands for supporting vehicle loads.
Lists model numbers, capacity per pair, base size, minimum, and maximum height.
Check product and application compatibility, inspect for damage, and ensure all parts move freely.
Install ratchet bar, set to lowest position, secure with cotter pin, and refer to vehicle manual.
Adjust height by pulling ratchet bar, ensure it's secured by the locking handle before loading.
Center load on saddle, lower vehicle onto stands, check security, and use wheel chocks.
Raise vehicle, unlock ratchet pawl, allow bar to glide down, remove stands, lower vehicle.
Inspect stands, ensure parts move freely, avoid oil/grease, sand and paint rust spots.
Store stands upright in a clean, dry area.
Covers defects in material/workmanship for two years; remedy is repair or replacement.
Excludes consequential damages, implied warranties limited, and voids warranty if modified.
