EasyManua.ls Logo

Heiniger CombiGrinder - Safety Regulations; Symbols; Persons; Power Supply Connections

Heiniger CombiGrinder
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 Translation of the original Instructions / CombiGrinder
1 Safety regulations
1.1 Symbols
WARNING
Warning! Danger of injury or death.
ATTENTION!
Indicates a potentially dangerous situation. Take preventative action.
NOTE
Tips and information’s.
Eye and hearing protection
Eye and hearing protection must be worn.
1.2 Persons
The non-observance of the instructions and safety regulations mentioned in this
manual can cause operating malfunctions or serious injury to persons. The safe
operation of the machine only places minimal requirements on the operating staff. It
is, however, essential that these are observed and complied with.
The operator shall be able to understand and demonstrate the operating controls
and the possible risks associated with this equipment.
The operator must have read and understood this manual. Further instructions by
a skilled instructor are needed to learn more details about danger while operating
this grinding device.
Unauthorised persons are not permitted to use the grinder.
Unauthorised persons are not permitted nearby the grinder when it is operated
or maintained.
Operation of the equipment is only permitted by authorised personnel. Persons
whose reactivity is affected by drugs, alcohol or pharmaceuticals are not permitted to
operate the equipment.
1.3 Power supply connections
The voltage specified on the rating plate and stated in this manual must match with
your local power supply. The grinder may only be connected to an AC power supply.
If the grinder is operated from a generator, the supplied voltage must not exceed the
specified voltage as stated on the rating plate. Never plug the grinder to a damaged
socket. Observe the relevant regulations applicable in your country. Completely
unroll the power cable before plugging in. Maintenance and cleaning of the grinder
should only be carried out when the grinder is unplugged.
1.4 Protective gear
Eye protection ear protection fingered gloves anti-slip shoes must be worn at any
time while operating this grinding device.