Call Service for assistance as soon as
possible.
Power supply to the
device has dropped
to below 170 V.
- This is not a device failure, this error
helps to prevent damages to the
compressor.
- The voltage needs to be increased back
to required levels
If this warning continues an authorised
technician needs to be contacted.
1. Set the freezer temperature to a
colder value or set Super Freeze.
This should remove
the error code once the required
temperature has been reached. Keep
doors closed to improve time taken to
reach the correct temperature.
Freezer
compartment is
not cold enough
Likely to occur
after long term
power failure.
2. Remove any products which have
thawed/ defrosted during this error.
They can be used within a short period
of time.
3. Do not add any fresh produce to the
freezer compartment until the correct
temperature has been reached and the
error is no longer.
If this warning continues an authorised
technician needs to be contacted.
To Next Page
Loading...
