First use
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal
accessories with lukewarm water and some neutral soap so as to remove the typical
smell of a brand new product, then dry thoroughly.
Important! Do not use detergents or abrasive powders, as these will damage the finish.
Turn on
Plug in the appliance, LED lighting.
Mode
When firstly push “Mode” button, the lamp of “Super freezing” is lighted on, and the
appliance would be freezing and the LED displays“SF”(super freezing).
When secondly push “Mode” button, the supper freezing lamp black out, and the
“Eco” lamp is lighted on, the appliance would go into “Eco” mode, the appliance will
run with the setting at -16℃ and the LED will display ”SE” (save energy).
When you thirdly push “mode” button, both of lamps of “Super freezing” and “Eco”
black out, the appliance would be back to setting mode by user.
The mode is cycling to change during “Super freezing”, “Eco”, and “Setting”.
To Next Page
Loading...
