What should I do if my Heinner Washer/Dryer shows fault code F04-F98?
If your Heinner Washer/Dryer displays a fault code from "F04" to "F98", turn the nub to the Off position for 3 seconds to turn off the machine.
General| Brand | Heinner |
|---|---|
| Model | HWDM-H10614A |
| Category | Washer/Dryer |
| Language | English |
Explains the manual's content for installation, use, and maintenance of the appliance.
Lists the items included in the package: washer dryer, user manual, and warranty card.
Covers safe use by persons with reduced capabilities and children's supervision.
Addresses electrical connections, grounding, water pressure, and cord safety.
Covers lint accumulation, ventilation, and drying specific items.
Details precautions for drying specific items like foam rubber or soiled textiles.
Focuses on packaging inspection and removal of transport bolts before use.
Identifies and labels the main parts of the washing machine via a diagram.
Advises reading the installation guide and general recommendations.
Lists included accessories like user manual, warranty card, plastic caps, inlet hose, and U-bend.
Step-by-step instructions for removing transport bolts to prevent damage.
Explains how to adjust feet and position the appliance for stability.
Instructions for installing the noise-reduction bottom cover for quieter operation.
Details how to connect the water supply hose, including attention points.
Explains how to connect the drain hose, including notes on kinks and length.
Specifies using grounded sockets, adequate supply, and professional installation.
Identifies and describes the functions of buttons and the display window.
Details available programs, their material compatibility, functions, and specifications.
Lists technical details like capacity, power, dimensions, and weight.
Explains how to start, stop, cancel programs, and use basic functions.
Covers child lock, delay end, mute function, door lock behavior, and reloading.
Explains how to use the drying function, levels, timings, and dry timetables.
Explains washing, drying, and ironing symbols and lists non-washable/non-dryable items.
Instructions for cleaning the appliance exterior and door seal.
Steps for removing and cleaning the detergent dispenser drawer.
Detailed steps for cleaning the filter, including safety precautions.
Advice on checking and cleaning the mesh filter in the water supply hose.
Lists common issues like failure to start, stopping during program, and foam detection.
Addresses problems with machine vibration and poor final spin results.
Explains specific fault codes (F01, F03, F13, F14, F24, Unb) and their remedies.
Steps to take before calling authorized service, including self-remedies and re-testing.
To Next Page
