Heitronics KT19 II User Manual

INFRARED RADIATION
THERMOMETER
KT19 II
Operation Instructions
95582717
46/06/19e (valid from firmware version 4.11 / 5.11)
All rights reserved! The reproduction, transmission or use
of this document or its contents is not permitted without
express written authority. Offenders will be liable for
damages. All rights, including rights created by patent
grant or registration of a utility model or design, are
reserved. Heitronics GmbH reserves the right to make
modifications and improvements in their design without
prior notice.
(c) HEITRONICS Infrarot Messtechnik GmbH
HEITRONICS
Infrarot Messtechnik GmbH
Kreuzberger Ring 40
D-65205 Wiesbaden
Phone: +49 (0)611 97393-0
Fax: +49 (0)611 97393-26
E-Mail: info@HEITRONICS.com
Internet: www.HEITRONICS.com

Heitronics KT19 II Specifications

General

Brand	Heitronics
Model	KT19 II
Category	Thermometer
Language	English

Summary

SAFETY INSTRUCTIONS

TECHNICAL SPECIFICATIONS

Basic Data

Outlines fundamental specifications like spectral sensitivity and accuracy.

Analog Output Specifications

Digital Interface and Connector Specs

Laser Specifications

12-pin Connector Assignment

Pinout details for the 12-pin connector used for various functions.

7-pin Connector Assignment

Pinout details for the 7-pin connector used for power and other signals.

Temperature Resolution Tables

Tables detailing temperature resolution (NET) for various models and conditions.

START-UP

Mounting

Mounting with Cooling Jacket

Mounting with Adapter B2-B7-B4

Electrical Connection

Explains how to connect power and output signals to the device.

Optical Sighting

OPERATION AND APPLICATION

Interface Communication

Sets up serial communication, control, and command protocols for the device.

Ambient Effect Correction

Manages ambient temperature compensation via Emission or Transmit/Reflect modes.

Response Time and Memory Management

Configures response time, memory functions, and self-reset options for data logging.

Alarms and Laser Control

Manages alarm thresholds, laser functions, and anti-glare filter settings.

Input and Output Configuration

Configures temperature units, analog/digital I/O, and serial interface settings.

Calibration and System Settings

Covers calibration, operating modes, display settings, and factory resets.

Error Detection and Monitoring

Details how to detect and monitor instrument errors and operational status.

MAINTENANCE AND CALIBRATION

Lens and Protective Window Cleaning

Protective Window Cleaning (Adapter B7)

Display Accuracy Check

How to check and verify the instrument's measurement accuracy.