helena BioSciences C Series - User Manual

Helena Biosciences Operator Manual:
Helena C-1, Helena C-2, Helena C-4
HL-2-P-3448 Rev. 3 Page 1
Operator Manual
Helena C-Series Family
Helena C-1 • Helena C-2 • Helena C-4
For In-Vitro Diagnostic use
Instrumentation and reagents for human coagulation and haemostasis
Copyright © 2020, Helena Biosciences Europe

Summary

1.4.5 Clotting Method (PT, APTT,..)

1.4.6 Chromogenic Method (Antithrombin):

Describes the chromogenic assay method for measuring analytes based on color change.

1.4.7 Immunoturbidometric Method (D-Dimer):

Explains the immunoturbidometric method for detecting antigen-antibody reactions.

1.5 Safety Information

1.5.1 Safety Information for Operation

Outlines critical safety precautions to ensure risk-free operation of the instrument.

1.5.2 Safety Information for Materials

Details essential safety guidelines for using approved materials, consumables, and reagents.

1.5.3 Safety Information Regarding Risk of Health

1.5.4 Safety Information for Cleaning, Maintenance and Servicing

1.5.5 Electrical Safety

2. Installation of the Helena C-Series

2.2 Conditions of Operation

2.3 First Installation

2.4 Switching On and Off

2.8 Tecam Smart

2.9 Registration

3. Operation of the Helena C-Series

3.1 Homescreen

3.2 Input Patient Identification

3.3 Test Selection

3.4 Measurement

3.5 System Settings

3.6 Test Settings

3.7 Review Results

4. Ticket System

5. Service Functions

5.1 System Information

5.2 Optic Check

5.3 System Report

5.4 Adjust Temperature

5.6 Typical Failures

6. Hidden Functions

6.1 Reset to Factory Default

Guides users through the procedure for resetting the instrument to its factory default settings.

7. Working with Tecam Smart

8. Cleaning and Maintenance

8.1 Cleaning

8.2 Decontamination

8.3 Regular Maintenance

helena BioSciences C Series Specifications