Heli-Max Kinetic 50 User Manual

READ THROUGH THIS INSTRUCTION MANUAL
FIRST. IT CONTAINS IMPORTANT INSTRUCTIONS
AND WARNINGS CONCERNING THE ASSEMBLY
AND USE OF THIS MODEL.
HMXZ7013 for HMXE0250 V1.1Entire Contents © Copyright 2007
Champaign, Illinois
(217) 398-8970, Extension 6
E-mail: helihotline@hobbico.com
INSTRUCTION MANUAL
TM
TM
Heli-Max
™
guarantees this kit to be free from defects in both
materials and workmanship at the date of purchase. This
warranty does not cover any component parts damaged by use
or modification. In no case shall Heli-Max’s liability exceed the
original cost of the purchased kit. Further, Heli-Max reserves
the right to change or modify this warranty without notice.
In that Heli-Max has no control over the final assembly or material
used for final assembly, no liability shall be assumed nor accepted
for any damage resulting from the use by the user of the final
user-assembled product. By the act of using the user-assembled
product, the user accepts all resulting liability.
If the buyer is not prepared to accept the liability associated
with the use of this product, the buyer is advised to return
this kit immediately in new and unused condition to the place
of purchase.
To make a warranty claim, send the defective part or item to
Hobby Services at this address.
Hobby Services
3002 N. Apollo Dr., Suite 1
Champaign, IL 61822
USA
Include a letter stating your name, return shipping address, as
much contact information as possible (daytime telephone
number, fax number, e-mail address), a detailed description of the
problem and a photocopy of the purchase receipt. Upon receipt of
the package the problem will be evaluated as quickly as possible.
WARRANTY
Rotor Span: 52.75 in [1340mm]
Weight: 7.5 lb [3402g]
Length: 47 in [1194mm]
Height: 15.25 in [387mm]
Engine: .46-.51 cu in [7.5-8cc] 2-Stroke
Gear Ratio: 9.1:1 (Main)
5:1 (Tail)

Heli-Max Kinetic 50 Specifications

General

Brand	Heli-Max
Model	Kinetic 50
Category	Toy
Language	English

Summary

Warranty and Support

Warranty Terms and Conditions

Details Heli-Max's guarantee, limitations, and user liability for product use.

Warranty Claim Procedure

Instructions on how to submit a warranty claim, including required information and contact details.

Assembly and Installation

Frame and Engine Assembly

Steps for assembling the lower/upper frames, fuel tank, and mounting the engine.

Rotor Head and Tail Boom Assembly

Instructions for assembling the main rotor head, flybar, and tail boom components.

Landing Gear and Mounts

Mounting the landing gear and gyro/tail servo components to the frame.

Equipment Installation

Installing servos, power switch, battery, receiver, and gyro unit.

Radio Configuration

Transmitter Setup and Basic Settings

Preparing the transmitter, setting modulation, reversing, and trims.

Control Curves and Gyro Setup

Configuring throttle/pitch curves and the gyro function for optimal flight.

Servo Linkage Setup

Connecting and adjusting servo linkages for cyclic, throttle, and tail rotor controls.

Pre-Flight and Flying

Blade Balancing and Tracking

Procedures for balancing and tracking main rotor blades for stable flight.

Final Assembly and Preparation

Installing body, decals, and performing final checks before the first flight.

Flight Controls and Procedures

Understanding controls, starting the engine, and basic flight maneuvers.