10
Meter/electric controller usage notice
1. Notice:
The meter must be used with the A type electric controller system and harness of our
company. The connections between the meters and harness should be done according to the
article 4, clause 2. The maintenance of the meter must be carried out by persons of our
company or qualified persons trained by our company.
2. Description
Meter E is the combined meter matching with battery forklift truck which consists of
LED time counter, electric quantity meter, other displays and control circuit. The main
controlling function of the meter is achieved by the single chip microcomputer. The meter
which is divided into main control panel and relay box is fixed on the meter panel.
The meter has functions of accumulating working time, monitoring electric quantity,
alarming and protecting when the battery capacity exceeding the lowest lever, auxiliary
display of the driving state and fault code display. It can be used in 1-1.5T, 2-2.5T
battery forklift truck, electric tractor and load-carrying truck.
3. Performance index
Battery quantity meter: red LED display with 10 levers. The last two bars flicker
alternately when the battery electric quantity is lowered than the limited lever. The
counting range of the time counter: 0-99999.9 hours.
Supplying voltage of the meter: 24VDC
Working temperature: -35℃～+55℃
Relative humility: ≤85%
Average power consumption: ＜3W
Altitude: ≤3000m
To Next Page
Loading...