Need help?Do you have a question about the Helion 2 XP50 PRO and is the answer not in the manual?
General| Display Type | AMOLED |
|---|---|
| Detection Range | 1800 m |
| Waterproof Rating | IPX7 |
| Sensor Type | Uncooled microbolometer |
| Frame Rate | 50 Hz |
| Pixel Pitch | 17 µm |
| Display Resolution | 1024x768 |
| Power Supply | 3.0-4.2V |
| Built-in Memory | 16 GB |
| Wi-Fi Channel | 2.4 GHz |
| Recognition Range | 800 m |
| Sensor Resolution | 640x480 |
| Magnification | 2.5 - 20x |
| Field of View (HxV) | 12.4x9.3 degrees |
| Operating Temperature | -25 … +50 °C |
| Battery Type | Li-Ion Battery Pack |
| External Power Supply | 5V |
| Video / Photo Format | .jpg |
| Battery Life | Up to 8 hours |
Configure device language settings.
Set the current date for the device.
Configure the current time and format.
Select measurement units (e.g., meters or yards).
Select or replace the objective lens type.
Restore device settings to factory defaults.
Format the internal memory card, erasing all data.
Set or change the Wi-Fi password for external access.
Configure user access levels for Stream Vision.
Instructions for recording video clips.
Instructions for capturing still images.
Use USB for external power supply without charging battery.
Connect as external storage to access saved files.
Diagnose and resolve issues with powering on the device.
Troubleshoot problems when using external power.
Address image clarity issues, possibly requiring calibration.
Adjust settings for low brightness or contrast images.
Identify causes for degraded image quality or range.
Resolve problems connecting to mobile devices.
Troubleshoot Wi-Fi connectivity problems.
Address display anomalies like lines or blank screen.
Understand performance changes in cold environments.
Diagnose why the observed object is not visible.
To Next Page