Selection of calibration mode.
There are three calibration modes: Manual (M), Semi-Automatic (SA) and Automatic (A).
To select the calibration mode:
1.
Press and hold the M (9) button to enter the main menu.
2.
Use the UP (10) / DOWN (8) buttons to select the Calibration Mode option.
3.
Press the ? (9) button briefly to enter the submenu.
4.
Use the UP (10) / DOWN (8) buttons to select one of the calibration modes.
5.
Press the M (9) button briefly to confirm the selection.
More details in the section Microbolometer Calibration.
To Next Page
Loading...