Need help?Do you have a question about the Heliotherm HP06L-K-BC and is the answer not in the manual?
General| Brand | Heliotherm |
|---|---|
| Model | HP06L-K-BC |
| Category | Control Unit |
| Language | English |
Overview of the control unit's physical components like display, buttons, and LEDs.
Instructions on navigating the control unit's menu system using buttons and the rotary knob.
How to select and configure various operating modes for the heat pump.
Adjusting the heating curve based on room temperature for optimal heating.
Configuring the night-time temperature setback for energy saving.
Setting the desired temperature for domestic hot water.
Viewing actual and target return temperatures of the heating system.
Monitoring the heat pump's current operational status and running times.
Setting the current date, time, and day of the week for accurate scheduling.
Programming daily switching times for the heating circuit operation.
Programming daily switching times for hot water generation.
Setting daily switching times for the circulation pump.
Configuring special settings for holiday periods or frost protection.
Setting a temporary mode for continuous operation, e.g., for parties.
Overview of various temperature readings from the heat pump system.
Viewing operating hours for the compressor and pumps.
Setting target room temperature, heating temperature, and setback temperature.
Adjusting the heating curve slope based on outdoor temperature.
Configuring normal and minimum temperatures for hot water.
Setting up the hot water circulation pump operation.
Setting parameters for Mixer 1, including target room, heating, and setback temperatures.
Configuration options for Mixer 1's basic operation, including date/time and operating mode.
Adjusting the heating curve for Mixer 1 based on temperature settings.
Setting parameters for Mixer 2, including target room, heating, and setback temperatures.
Configuration options for Mixer 2's basic operation, including date/time and operating mode.
Adjusting the heating curve for Mixer 2 based on temperature settings.
Configuration for the solar system, including solar CT1, requirement, and buffer norm.
Display of analogue and digital inputs/outputs for manual operation, set by expert.
Checking the status of safety components like HD switch and vaporising pressure.
Displaying voltage, current, and electric output from the heat meter.
Showing flow, temperatures, and cooling output from the energy meter.
Accessing different user levels (User, Technician, Expert) via code and level selection.
How to clear operating faults and reset the heat pump.
Space to record initial controller settings for future reference or reset.
Overview of the main menu options and their corresponding submenus/pages.
Detailed structure of the basic operation menu items and their functions.
Detailed structure of the time programmes menu options.
Detailed structure of the temperatures menu options.
Detailed structure of the operating hours menu items.
Detailed structure of the heating circuit menu options.
Detailed structure of the hot water treatment menu options.
To Next Page