9
(pic. B)
B:1. Hygiene kit: 99403-001
B:2. Sweat absorbers: 99900-001
B:3. Windshield boom microphone: 16999-001
B:4. USB charging cable Local: 39927-001
B:5. Boom microphone: 16982-001
B:6. Windshield level dependent microphones: 1059-001
B:7. Spare headband electronic: 26046-915
B:8. Spare helmet arm (pair): 26108-910
B:9. Battery pack AA: 17004-001
B:10. Battery pack gasket: 17112-001
B:11. Charger EU: 17193-001
B:12. Charger UK: 17193-007
(pic. D)
•Remove the old foam liner (A3) and insert the new
•Centre the new ear cushion over the hole
(E)
E:1) Headband
E:2) Helmet mounted
E:4) Weight
E:5) Mean attenuation
E:6) Standard deviation
E:7) Assumed Protection Value
E:9) Headband force
E:10) Size: S, M & L
E:11) Additional technical data
E:12) Radio channel frequencies
E:13) Sub tone channel frequencies
listed in table G.
G:1) Manufacturer
G:2) Model
G:3) Adapter
Hereby, Hellberg Safety AB declares that the hearing protector Local 446 is in compliance with PPE regulation EU 2016/425
and the RED Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.hellbergsafety.com/
declaration-of-conformity
For manufacturing date, see the date clock on the inside of the ear cup. Expected lifetime of product, excluding its batteries, is 5
years. Serial number is placed on label on the bottom of the ear cup.
This product is covered by the Waste Electrical and Electronic Equipment Directive (WEEE) 2012/19/EU.
Do not dispose of your product as unsorted municipal waste. Batteries must be disposed of in accordance with national
regulations. Use local recycling system for electronic products.
To Next Page
Loading...