USING THE APPLIANCE
This appliance is designed for domestic use only, especially for the storage of edible food.
This appliance is designed to operate in ambient temperature (surrounding air temperature) no
higher than 38°C.
If the ambient temperature is warmer than 38°C, the appliance will not operate correctly.
Before Use
• When using the freezer for the first time, remove all securing tapes.
• Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth, the inside with a damp cloth.
• Keep the door open and insert the power supply cord into the socket.
• Turn the thermostat control knob to 1. Close the door and let the freezer operate.
Note: After installation, the appliance should be left for 2 hours before it is switched on in order to allow the
refrigerant to settle
Thermostat Control
The thermostat control knob situated in the control panel regulates the temperature of the freezer
compartment.
Position “0” – Stop running.
Position “1-5” – The temperature will be maintained at between -18°C and -36°C.
Position “6”- Continuously running at coldest temperature.
Position “7” – Super fast freeze mode. For food need to be frozen quickly.
Please note that
1. The temperature mentioned above will be affected by:
• Room temperature
• How often the door is opened
• Location of the appliance
2. Super fast freeze mode is for quick freeze only. Do Keep the thermostat control knob at position 7 more
than 3 hours. Turn the knob to 1-5 to keep a normal freeze temperature.
In determining the correct temperature control setting, all these factors have to be considered and some
experimentation may be necessary.
Do not allow children to tamper with the control knob or play with the product.
Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or
products containing alcohol.
Starting the Appliance
1. Allow the appliance to stand for 2 hours after installation.
2. Plug in the appliance and switch on at the mains supply.
3. Turn the thermostat control to the desired setting. A midway setting is usually suitable for normal
operation (see thermostat control).
4. Leave the appliance for approximately 4 hours for the correct temperature to be reached before
placing food inside.
To Next Page
Loading...
Need help?
General
