Hellwig 7708 - User Manual

To Next Page

INSTALLATION INSTRUCTIONS

2009+ Dodge 1500 2WD

FRONT STABILIZER BAR

Thank you for purchasing a quality Hellwig Product.

PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION

SAFETY: BEFORE STARTING YOUR INSTALLATION, BE SURE TO SET PARKING BRAKE AND

CHOCK TIRES.

NOTE: TO EASE INSTALLATION AND TO PROPERLY ADJUST THE BAR, THE WEIGHT OF THE

VEHICLE MUST BE ON THE SUSPENSION, AS IF DRIVING DOWN THE ROAD. DO NOT

RAISE VEHICLE BY THE FRAME.

NOTE: THIS SWAY BAR IS DESIGNED TO REPLACE THE FACTORY INSTALLED SWAY BAR AND

REUSES THE FACTORY SUPPLIED END LINKS.

559-734-7451 800-367-5480 FAX 559-734-7460

7708 ( R-7708 ) 11/19/2009

Need help?

Do you have a question about the Hellwig 7708 and is the answer not in the manual?

Summary

Set parking brake and chock tires before starting installation.

Ensure vehicle weight is on suspension; reuse factory end links.

Steps to remove factory sway bar, install new bar, and perform final checks.

General