2
1
2
a
b
c
3
INSTALLATION INSTRUCTIONS
1. The supporting bracket is to be
fastened onto the wall in accordance
with the measure stated on the next
page.
3. The heater is to be mounted onto the
supporting brackets so that the
connection box and the knobs (if there
are any) will be visible and easy to
reach. The highest part of the top
should always be closest to the wall. If
this is not the case the top should be
turned around immediately. The top is
fastened with two screws on each side
of the rock container, see drawing.
Screws
To Next Page
Loading...
