Helo Fusion 60 - 2.6. Operation of the sauna heater controls; 2.6.1. Control centre operation modes

7
2.6. Operation of the sauna heater controls
Control centre buttons
1. Start / Stop
2. Light
3. Fan
4. Remote control
5. Selection / Acknowledgement
6. Arrow up / down
7. Memory slots
Indicator lights of the control centre
8. Humidity
9. Temperature
10. Operating time
11. Pre-selection time
12. Normal sauna
13. Steam sauna
14. Fan
15. Light
16. Remote control
2.6.1. Control centre operation modes
Standby mode: The control centre display is dark and the following functions are possible.
• Checking and setting the time
• Checking the memory slot contents
• Setting the remote control mode
Use / Basic mode of the control centre when the Start button programming mode
programming is pressed. The following functions are possible in this
mode
• Starting the sauna heater as quick selection (Memory slots 1-4)
• Programming the memory slots
• Setting the mode, time, temperature, humidity and pre-selection time for bathing
4
3
2
1
A
A
R
helo
OK
1
2
3
4
5
6
7
10
9
8
11
13
12
15
14
16