HELSPORT LAVVU User Manual

1
2
3
4
5
6
PLACEMENT: Find an open area which is at and free of sharp
objects (rocks, roots, etc.)
ASSEMBLE THE POLE:
Make sure the joints are completely
connected to avoid weak points.
LAY THE OUTER TENT FLAT ON THE GROUND:
Spread out the
tent in a circular form. Place the stakes in all the corner loops.
Skis and/or poles can be used instead of stakes in snow/winter
conditions.
ADJUSTMENT:
Close the zipper door. Tighten the outer tent by adjusting
the stakes. Use the guy lines to increase wind stability and increase volume.
Place rocks or other heavy objects on the storm mats in heavy winds.
USER GUIDE
LAVVU
RAISE THE LAVVU: Open the zipper door on the outer tent.
Place the smaller end of the pole into the pocket at the peak.
Raise the lavvu and place the bottom end of the pole in the
center.
OBS! Bottom of the midtpole must be placed slightly off center
with use of campre inside lavvu.
TOP HAT:
For lavvus with removeable top hat It is reccommended that you
attach the top hat previous to raising the lavvu. Place the top hat over the top
opening of the outer tent and connect the guy lines to the eyelet holes via their
attachment hooks.
For lavvus with adjustable top hat, the top hat are xed. The opening can be
regulated from inside the lavvu by adjusting the color-coded cords. Open the top
by pulling on the green cord, and close by pulling the red cord.

HELSPORT LAVVU Specifications

General

Category	Tent
Type	Lavvu
Waterproof	Yes
Ventilation	Yes
Fire retardant	Yes
Capacity	Varies by model
Weight	Varies by model
Dimensions	Varies by model
Packed size	Varies by model
Doors	1

Summary

Setting Up the Lavvu

Site Placement

Select a flat, open area free from sharp objects like rocks and roots for optimal tent placement.

Pole Assembly

Ensure all pole joints are completely connected to prevent weak points during setup.

Laying Out the Outer Tent

Spread the tent flat in a circular form and place stakes in all corner loops; use skis or poles in snow/winter.

Raising the Lavvu

Open the zipper, place the smaller pole end into the peak pocket, then raise the tent and place the bottom end in the center.

Adjusting Tent Tension

Close the zipper, tighten the tent using stakes, and adjust guy lines for wind stability and volume.

Attaching the Top Hat

Attach the removable top hat over the opening before raising; connect guy lines to eyelets for stabilization.

User Tips and Maintenance

General User Tips

Check equipment and practice setting up the lavvu before your first outing.

Ventilation Systems

Air vents are adjustable from inside. Two top hat systems exist: permanent and removable.

Managing Condensation

Condensation arises from people, air humidity, and ground moisture; use a floor for a barrier.

Stability in Rough Weather

Increase stability using guy lines, stakes, or placing stones/snow on storm mats.

Campfires in the Lavvu

Campfires offer warmth and cooking. Ensure proper fireplace size, low flame height, and fire safety.

Lavvu Fabric Care

Prevent long-term sun exposure as UV radiation degrades fabric performance.

Maintenance and Cleaning

Dry lavvu before storage. Clean with a moist sponge (max 30°C) without detergent. Repair zippers.

Waterproofing

Re-waterproof fabric when water no longer beads off, indicating treatment has worn out.

Repair Kit Usage

Use the provided repair kit for emergency patches and thread to fix minor damages.