To Next PageTo Next Page
Need help?Do you have a question about the Helvi UNITECH 328 and is the answer not in the manual?
Guidance on protecting yourself from welding hazards like arc rays, fumes, and electric shock, including required PPE.
Measures to prevent fires and explosions caused by welding operations, including extinguisher use and area preparation.
Critical warnings and procedures related to electric shock hazards during welding operations.
Essential safety instructions to follow before and during electrical connection and operation.
Connecting the welder for MIG welding and selecting between 2T/4T modes.
How to adjust inductance and display various welding parameters on the unit.
Using Manual (Job List 10) and Synergic (Job List 11-99) MIG welding modes.
Configuring rapid setup parameters (Pre Gas, Slope, etc.) and using the Constant Voltage function.
Lists common error codes displayed by the welder and provides remedies or troubleshooting steps for each.
Resolving issues like the welder having no display or the feed motor operating without feeding wire.
Troubleshooting low penetration, wire birdnesting, wire burning back, and hot workpiece clamps/cables.
Addressing problems such as the gun nozzle arcing or cable connections causing overheating.
General| Brand | Helvi |
|---|---|
| Model | UNITECH 328 |
| Category | Welding System |
| Language | English |
