Hemsson Fairybell Flagpole User Manual

Assembly instructions - Opbouw instructies
Aufbauanleitung - Instruction de construction
Istruzioni di assemblaggio - Monteringsanvisning
Fairybell
®
Flagpole
Fairybell
®
is a registered trademark of
Hemsson Holding BV www.fairybell.com
This is a worldwide patented product | Certifications: CE and
RoHS compliant
Important information
After (seasonal) use, make sure the Fairybell
®
is
completely dry. Lay the Fairybell
®
out on the ground
and tie the orange ribbons around various sections of
the Fairybell
®
(straps with lights) so that next season
you start with an untangled Fairybell
®
.
When placing the Fairybell
®
back into the box, hold the
top hook and lower the bottom part (plugs and elastics)
first into the box and finish on top with the hook.
Always store the Fairybell
®
in a clean and dry place.
Lower the Fairybell
®
at windforce 6 or higher.
Missing parts or defects
All spare parts can be ordered at our webshop.
See ‘service request’ at our webshop.
Need help?
Do you need help with placing the Fairybell
®
?
Scan the QR code below to watch the instructional
videos from our products.
Scan QR for our
instructional videos
www.fairybell.com

Hemsson Fairybell Flagpole Specifications

General

Light source	LED
IP Class	IP44
Light color	Warm white
Material	Metal
Base Type	Metal

Summary

Important Information and Support

Seasonal Use and Storage Guidance

Instructions for drying, untangling, storing, and protecting the Fairybell® from wind damage.

Parts, Defects, and Help

Information on ordering spare parts, reporting defects, and accessing instructional videos.

Fairybell® Flagpole Assembly Instructions

Step 1: Parts Inventory

Identify all components included in the Fairybell® flagpole kit before assembly.

Step 2: Ground Preparation

Prepare the installation site by digging a hole of specified diameter and depth.

Step 3: Ground Stake Installation

Insert the ground stake into the prepared hole, ensuring it is securely anchored.

Step 4: Pole Section Assembly

Connect the flagpole sections and attach the top cap with the hook.

Step 5: Attaching the Fairybell

Connect the Fairybell light string to the top hook of the assembled flagpole.

Step 6: Deploying the Lights

Carefully lower and spread the Fairybell light string around the flagpole.