BX616 Portable Multi-gas Detector Using Manual
5
Sensor is overdue Please contact the manufacturer or dealer to
replace the gas senor
Inaccurate indication
Uncalibrated for long time Please calibrate it in time
Battery voltage is used up Please charge it and reset time Fault indication of time
Strong electromagnetism disturb Please reset time
Zero calibration is unavailable Too much zero drift of gas sensor Please calibrate or replace the gas sensor
Minus gas level displayed Gas sensor drift Calibrate zero point
Sensor fault indication Sensor fault Please contact the manufacturer or dealer to
replace the gas senor
10. Notices
10.1 Falling down from high places or strong shake is prohibited.
10.2 The detector may not work properly at interferential high-concentration gas.
10.3 To avoid incorrect result or possible damage to the detector, please operate and handle the
detector in accordance with the manual.
10.4 The detector should be not stored or used neither under the circumstance with caustic gas
(such as Cl
2
), nor under the other rugged circumstances, including excessive high or low
temperature, high humidity, electromagnetic field and strong sunshine.
10.5 If there is dust on the surface of the detector after a long-term use, please clean it lightly with
clean soft cloth. The surface may be scraped or destroyed with caustic solvent or hard
things.
10.6 To assure the testing accuracy, the detector should be calibrated periodically. And the
calibration period should be less than one year.
10.7 Please put the used Lithium batteries to the appointed places or send to our company. Don’t
discard them into the dustbin at random.
11. Standard accessories:
Charger 1pc
Calibration cap 1pc
Communications cable 1pc
CD driver 1pc
User manual 1pc
Relative portable accessories 1set
To Previous Page
Loading...