Need help?Do you have a question about the Henan Oceanus Import & Export OC-1000 and is the answer not in the manual?
General| Operating Humidity | 0-95% RH (non-condensing) |
|---|---|
| Protection | IP65 |
| Operating Voltage | 3.7V |
| Resolution | 0.1%LEL, 0.1%Vol, 1ppm |
| Response Time | ≤30s |
| Sensor Type | Electrochemical sensor, Catalytic combustion sensor |
| Operating Temperature | -20°C to 50°C |
| Power Source | Rechargeable lithium battery |
| Battery Life | 8 hours continuous use |
| Weight | 300g |
| Alarm Output | Audible and visual |
| Gas Type | Flammable gas, toxic gas, oxygen |
| Measuring Range | 0-100%LEL, 0-1000ppm, 0-30%Vol |
Explains the function of each of the seven keys across different interface modes.
Provides guidance on handling situations where the device measures beyond its specified range to prevent sensor damage.
Details warranty information and free calibration services provided by the manufacturer.
Covers backlight behavior, muting alarms, manual data storage, and menu entry.
Describes how to revise device parameters using the 'Back', 'OK', and directional keys.
Details the seven keys and their functions across Testing, Menu, and Setting interfaces.
Explains the procedures for powering on and off the OC-1000 detector.
Illustrates different interface displays for varying numbers of detected gases and mentions alarming symbols.
Explains how to navigate and utilize the main menu functions, including settings and data management.
Addresses issues with unstable value displays and weak response, providing solutions.
Details common faults related to pump strength, failure to turn on, and charging problems.
To Next Page