To Next PageTo Next Page
Need help?Do you have a question about the Henden HSMC15 and is the answer not in the manual?
Highlights potential dangers of incorrect installation or operation, emphasizing user safety.
Warns against unsupervised use by children or infirm persons to prevent accidents.
Mandates that all power connections and wiring must be executed by an authorized electrician.
Ensures sufficient water flow through the cell to minimize gas build-up and ensure proper chlorine production.
Advises regular checks on the flow switch paddle to ensure it moves freely for safety.
Provides instructions for selecting a suitable, ventilated location and mounting the power supply unit.
Details the correct placement of the HSMC cell in the pool plumbing system, after other equipment.
Explains how to connect the HSMC cell lead to the power supply unit.
A table specifying the amount of salt required for different pool volumes to reach target concentrations.
Recommends maintaining Total Dissolved Solids (TDS) between 4,000-6,000ppm for optimal performance.
Advises on regular monitoring and cleaning of the cell to prevent scale and ensure longevity.
Explains how to adjust the chlorine production level as a percentage of maximum output.
Describes Boost Mode for super-chlorination during periods of high demand or extreme weather.
Step-by-step instructions to turn the Boost Mode on or off via the control panel.
Describes the alarm triggered by insufficient water flow and its impact on operation.
Explains the conditions that trigger the 'Add Salt' notification.
Details the alarm for critically low salt levels and the reset procedure.
Details two methods for cleaning the cell, including essential safety precautions.
Identifies common issues and checks for zero chlorine production.
Identifies common issues and checks for reduced chlorine production.
General| Brand | Henden |
|---|---|
| Model | HSMC15 |
| Category | Water Filtration Systems |
| Language | English |
