Need help?Do you have a question about the Henderson g60 and is the answer not in the manual?
General| Brand | Henderson |
|---|---|
| Model | g60 |
| Category | Garage Door Opener |
| Language | English |
Identifies key dimensions (A, B, C, D, E, F) for installation positioning.
Lists necessary tools like drill, pliers, level, and fasteners.
Shows components labeled 1 and 9 for track assembly.
Illustrates the use of fasteners (part 2) with quantity x3.
Details the mounting of the vertical track (part 1) to the wall.
Shows attachment of horizontal rail components (parts 4, 5, 6).
Securing the vertical track (part 1) to the wall using fasteners.
Mounting the horizontal tracks (part 1) to the vertical tracks.
Illustrates the installation of the torsion spring system.
Attaching support brackets (part 3) for the horizontal track.
Fine-tuning the position of the vertical tracks (parts 4, 5, 6, 7).
Attaching the door panels to the track system using rollers (part 7).
Connecting the operator arm (part 1) to the door.
Assembling the torsion spring (part 1) and cable drums (parts 3, 4, 5).
Completing the installation and performing initial checks.
Completing the installation and performing initial checks for TOR.
Fitting the rollers (parts 1, 2, 3, 4, 5) into the door panels.
Detailing the process of winding the lift cables (part 4a, 4b).
Securing the operator unit (part 1) to the structure.
Mounting the operator unit for the TOR model.
Making adjustments to the door panels (parts 3, 4, 5) for proper alignment.
Ensuring the door is correctly balanced for different sizes (B=1900-2250, etc.).
Installing wall anchors for securing the system (A<=3000 and A>3000).
Attaching the safety edge sensor (part 2) to the door.
Linking the operator arm (part 1) to the door mechanism.
Performing an initial test of the door's movement cycle.
Confirming the complete and correct operation of the garage door.
To Next Page
