To Next PageTo Next Page
Need help?Do you have a question about the Henderson Magic 600 and is the answer not in the manual?
General| Manufacturer | Henderson |
|---|---|
| Type | Garage Door Opener |
| Model | Magic 600 |
| Remote Control | Yes |
| Safety Features | Auto-reverse |
Brief overview of the manual's purpose and reading instructions.
Details about the door operator's components, packaging, and symbols used.
Information on intended use, guarantee conditions, and informal safety precautions.
Crucial safety guidelines to follow during operation and installation.
Essential precautions for safe installation and description of built-in safety devices.
Steps for performing safety inspections, including load switch-off and emergency release.
Overview of the operator's controls, indicators, and connection points.
Prerequisites and checks before commencing the installation.
Steps for installing the operator and bringing it into operation.
Methods for teaching the door operator, with and without remote transmitters.
Instructions for programming new remote transmitters and deleting existing ones.
Guidelines for safe operation and accessing the operator's programming settings.
Navigating programming menus, exiting, and saving settings.
Detailed parameter settings and critical safety warnings related to programming.
Procedures for resetting teach-in data or factory settings.
Connecting photo cells, safety rails, and emergency stop buttons.
Connecting auxiliary devices and initial troubleshooting steps.
Guide to error messages, causes, and remedies for troubleshooting.
Common problems like slow operation, unexpected stops, and unresponsive controls.
Procedures for replacing the device fuse, remote battery, and maintenance schedules.
Key electrical, dimensional, and performance data for the operator.
Instructions for mounting the door connection profile suitable for the specific door type.
Description, function, and visual guide for the internal emergency release.
List of major components and their associated part numbers for identification.
Warning that only authorized personnel should replace marked spare parts.
Illustrations detailing key steps in the installation process.
Overview of product description, applied standards, directives, and test results.
Details on applied requirements, standards, directives, and testing for the machinery.
