Technical data
Temperature after 6 hours on warming plate
Measurements appliance 208793 lxwxh
Measurements appliance 208779 lxwxh
Measurements of packaging lxwxh
Net / Gross weight 208793
Net / Gross weight 208779
Possible problems and how to solve them
Power switch is in ON position,
but the lamp on the switch and
the in-use indicator lamp do not
light up.
1. Appliance is not plugged in.
2. Power switch is broken.
1. Insert plug into socket.
2. Contact your supplier for a
new switch.
Power switch is in the ON
position and the lamp on the
switch is on, but the in-use
indicator lamp does not light up.
1. Relay is broken.
2. Water level sensor is broken.
Power switch is in the ON
position and both lamps are lit
up but the water is not passing
through the machine.
1. Heating element is broken.
2. Temperature safety device is
damaged.
Appliance works, but water flow
is sometimes interrupted for
more than five minutes.
1. Relay is broken.
2.Temperature safety device is
damaged.
A fuse in the fuse box blows
when the appliance is turned
on.
► Empty the appliance (no water can remain in the appliance) before it is repaired.
If in doubt, always contact your supplier!