Hendi H90 - Controls and Cooking Recommendations; Timer and Temperature Control; Cooking Advice and Indicator Lights

7
3). Timer control
• A cooking time of maximum 120 minutes can be
set. For this purpose, set the Timer control to the
desired time. The cooking time can be increased
or decreased at any time during operation.
Note: To set time with higher precision, first turn
the Timer control over the desired time position
a little, then return back to the desired time po-
sition.
• When the set time ends, the Timer control &
the Temp control indicator lights go off and a
sound will be heard.
4). Temp control
• A cooking temperature of maximum MAX (300°C)
can be set. For this purpose, set the Temp control
to the desired temperature.
• Similarly, the cooking temperature can be in-
creased or decreased at any time during oper-
ation.
Note: When the temperature reaches the desired
setting, the Temp control indicator will go off.
If the temperature drops, the Temp control indi-
cator will light on again. This process will be
repeated automatically.
Note: Please note that there is a safety thermal
cut out device for protection located at the lower
rear side of the appliance with a protective cap
(See ---> RESET with the SAFETY CUT-OUT ).
This is to prevent the appliance from getting too
high and turn off automatically.
Tips for cooking
• Check the recipe first for the Timer control and
Temp control setting.
• Ensure there is enough space between the food
for the heat to be evenly distributed.
• Cooked food and parts of the appliance get very
hot for some time after cooking. Do not touch
them with bare hands while in use or shortly af-
ter use.
0
50
1
0
0
1
2
5
1
5
0
1
7
5
2
0
0
2
2
5
2
5
0
2
7
5
M
A
X
0
10
20
30
40
50
60
70
80
90
10 0
11 0
12
0
Handle
Timer knobTemperature
control knob
Timer indicator
light
Temperature
light
Fan
Wire rack
mounts