To Next PageTo Next Page
Need help?Do you have a question about the Hendi 225035 and is the answer not in the manual?
General| Brand | Hendi |
|---|---|
| Model | 225035 |
| Category | Convection Oven |
| Language | English |
Guidance on technical check-ups for appliance longevity and ordering spare parts.
Crucial safety guidelines for users, covering handling, modifications, and specific operational risks.
Comprehensive technical data of the appliance, including dimensions, weight, power, and operating parameters.
Essential instructions for qualified personnel regarding appliance installation and connection.
Steps for attaching and adjusting the appliance's feet for stable placement.
Guidelines for optimal placement to ensure proper ventilation and stability.
Detailed requirements for safely connecting the appliance to the electrical mains.
Instructions for connecting the appliance to the water supply, specifying pressure and water quality.
Procedure for connecting the water pump system for appliances with optional tank predisposition.
Step-by-step guide for wiring the power cable to the terminal board.
Explanation of the safety thermal breaker and its reset procedure.
Practical guidance for users on initial setup and everyday operation of the oven.
Critical safety information on potential hazards and precautions to prevent injury.
Comprehensive guide to understanding and operating the oven's control panel.
Detailed explanation of the icons and indicators on the control panel.
Information on how the oven control panel powers on and initializes.
Procedures for correctly turning off the oven and its control panel.
Explanation of the different operating modes (manual, programmed) and parameter settings.
Detailed instructions for setting cooking parameters (time, temperature, humidity) in manual mode.
How to start, stop, and manage cooking cycles, including extra-time and automatic restart.
How to view and adjust cooking parameters while a cycle is in progress.
Instructions for setting a delayed start for cooking cycles, including time limits and manual mode restriction.
Overview of the programmed cooking mode, allowing saving up to 99 cooking programs.
Step-by-step guide for saving custom cooking programs using the MEMO button.
How to select and run a previously saved cooking program.
How to activate manual humidification and interrupt automatic humidifying cycles.
Explanation of the door mechanism that stops and resumes cooking cycles.
How the oven behaves and resumes operations after a power interruption.
Description of the two main cooking techniques: convection and convection with humidification.
Details on how convection cooking works and its benefits.
Explanation of the advantages of using humidification for cooking.
Essential procedures for cleaning and maintaining the oven to ensure safety and longevity.
Instructions for general cleaning of the oven's interior and exterior parts.
Specific steps for thoroughly cleaning the oven door.
Guide on how to safely replace the oven's interior light bulb.
A guide to identifying and resolving common faults and error messages.
Steps to diagnose and fix issues where the control panel is not functioning.
Troubleshooting steps for when the oven fails to start a cooking cycle.
Solutions for problems related to water flow for humidification.
How to address issues with water or vapor escaping from the door seal.
Steps to resolve uneven cooking results.
Troubleshooting for when the interior oven light fails.
Diagnosing and resolving the "ER1" error code.
Information on obtaining professional technical support and service.
Consumer information regarding product disposal and environmental directives.
Electrical schematic diagrams and component identification for the appliance.
Identification of the main power terminal board.
Identification of the safety thermostat component.
Identification of the door microswitch component.
Identification of the electronic control card.
Identification of the humidifier solenoid valve.
Identification of the contactor coil component.
Identification of the oven lighting lamp.
Identification of the circular heating element.
Identification of the oven's motorised ventilator.
Identification of the capacitor component.
