Need help?Do you have a question about the Henkelman Falcon 2-60 and is the answer not in the manual?
Instructions to record essential data from the machine's identification tag.
Instructions for safe electrical connection, including earthing and cable handling.
Checks and procedures for the vacuum pump before operation, including oil and conditioning.
Key advice for operating the machine, including product suitability and troubleshooting contact.
Explanation and location of critical warning signs on the machine.
Importance of regular and complete maintenance for optimal performance and longevity.
Critical safety instructions to follow before and during maintenance procedures.
Daily, weekly, and periodic maintenance tasks for the machine.
Essential activities for maintaining the vacuum pump's performance and lifespan.
Step-by-step guide for draining, filling, and checking vacuum pump oil levels.
Detailed instructions for replacing sealing wires and teflon tape on the sealing bar.
Detailed specifications for Boxer, Marlin, Falcon, and Polar series machines.
Wiring diagram for the control current of Boxer and Toucan series machines.
Wiring diagram for the main power supply of Boxer and Toucan series machines.
Wiring diagrams for control current of Marlin, Falcon, and Polar series machines.
Main power supply circuit diagram for various machine series.
Indicates premature interruption of the cycle, often due to cover switch issues.
General| Model | Falcon 2-60 |
|---|---|
| Sealing Bars | 2 |
| Programmes | 10 |
| Seal Bar Length | 600 mm |
| Voltage | 400V |
| Machine Cycle | 15-20 seconds |
| Power Supply | 3-phase |
To Next Page