Loher Str. 4
58332 Schwelm
Germany
fon: +49 2336 92 98-0
fax: +49 2336 92 98-100
info@henning-gmbh.de
www.henning-gmbh.de
www.henning-cnc.de
Operating Instructions Elevator Buffers LP Page 9 Edition 3.3.1 EN of 03.04.2017
10 Service
For ordering replacement parts, please, contact
our Service Department.
Henning GmbH & Co KG offers elevator buffers
as repair/ exchange. These buffers can be sup-
plied in a short time, have been overhauled in
our works and are supplied with full manufactur-
er's guaranty.
The following buffer-specific data is always re-
quired:
• Buffer type
• Serial number
• Maximum and minimum impact mass
• Rated travel speed.
11 Recycling
At the end of its working life, the buffer can be
recycled as follows:
• Relieve the gas pressure as described
in 8.2
• Fully remove the hydraulic oil and sup-
ply it to company for used oil recycling
• Dispose of the buffer as iron scrap
To Next Page
Loading...