Need help?Do you have a question about the HEOS Home Cinema and is the answer not in the manual?
General| Channels | 2.1 |
|---|---|
| HDMI Inputs | 1 |
| Subwoofer | Wireless |
| HEOS Integration | Yes |
| Audio Formats | Dolby Digital |
| HDMI Output | 1 (ARC) |
| Digital Inputs | Optical |
| Analog Inputs | 3.5mm AUX |
| Wireless | Wi-Fi, Bluetooth |
Confirm that the Soundbar and Subwoofer are present in the main packaging.
Check the accessories box to ensure all necessary cables, adapters, and parts are included.
Position the Soundbar near your TV, installing feet if necessary for clearance.
Information on wall mounting the Soundbar using keyhole mounts and a template.
Attach non-skid pads and position the Subwoofer on the floor near the Soundbar.
Connect the Soundbar and Subwoofer to wall outlets using provided power cords.
Connect the HEOS HomeCinema to your router using an Ethernet cable if using a wired network.
Connect and position the IR blaster to face the TV's IR receiver for remote control pass-through.
Download the HEOS by Denon app from app stores on your mobile device.
Open the HEOS app and follow the on-screen instructions for setup and control.
Access the full online manual for detailed functions and operation procedures.
Troubleshoot HEOS device connection problems, including 'Device was not found' and network interference.
Address music playback interruptions, delays, or lack of sound from the subwoofer.
Resolve issues where the HEOS HomeCinema might block TV remote IR signals.
Connect HEOS device using WPS or reset network settings for troubleshooting.
To Next Page