Do you have a question about the HEPA FLT4825 and is the answer not in the manual?
Brand | HEPA |
---|---|
Model | FLT4825 |
Category | Water Filtration Systems |
Language | English |
Check plug, filter seating, and if it's an upgraded replacement. Contact support if needed.
Verify power connection, filter seating, and rear cover latch. Contact support if issues persist.
Check and clean pre-/HEPA filters. Replace filter if necessary for air flow.
Ensure filters are clean and replace them if needed to reduce noise.
Press the lock & release button to remove the unit's rear cover.
Take out the used combination filter and dispose of it properly in the garbage.
Place the new filter system into the unit, ensuring correct orientation.
Consult the arrow on the filter for proper installation direction.
Follow all safety guidelines and read all instructions before using the product.
Keep children away from packaging. Discard plastic immediately. Contact support for damaged filters.
Replace filters every 3-6 months. Do not clean filters with water or other liquids.
Provides headquarters address, email, and toll-free number for support.
Details support operating hours and advises on having order information ready.