SERVICE MANUAL for
Work Chairs, Coxit-chairs and Standing support chairs
5
Short product description
Hepro`s work chairs, Coxit-chairs and Standing support chairs covers a wide range of models and
variants. They are tested and
approved in accordance with the NAV`s requirements. Permitted user weight is max. 150 kg.
Standing support chairs is tested and
approved for user weight up to 120 kg.
The wheel base for the work chairs and Coxit-chairs is four armed and of cast aluminum. It is painted with powder coating, which provides a robust
and durable surface. When designed the emphasis was to get best possible space in front of the wheelbase to simplify the transfer by «kicking»
oneself forward with the legs. To the Standing support chairs, one uses a
five-armed wheel base of cast aluminum.
Rear wheels for work chairs and Coxit-chairs have hand operated central brake, which locks both roll and
rotation. The casters are of plastic,
and designed to be most gently to the ankles.
The lifting unit for work chair and Coxit-chairs are available in two models, manually seat lift with gas spring and electric seat lift with
actuator. Both modes have regulation height of 100mm,150mm and
200mm, 150 as standard and 100 and 200 as accessories. The seat
height can be changed by further adjustment of the central unit`s mounting height (See section 2.5.1). To the Standing support chairs there are
several
gas springs with different lengths.
The seat unit for the work chairs has four main models, Standard, Aktiv Tilto and Tilto 24/7. All
ergonomically designed to provide the
best possible comfort. The models have several variants of seats and backrests. By combining these one can adjust the product to the great
majority of users. Coxit seat with angle adjustable flaps is delivered to the Coxit-model. There are special seats (Sadel and Alternativ)
to the
Standing support chairs.
Seat cushions are “snapped” fastened and can be removed without tools with the exception of the seat
cushion “Aktiv” where the complete
seat is removed from the sliders. The Sadel seat has no loose
cushion, but is delivered as a complete seat.
Backrest cushions are “snapped” fastened and can be removed without tools.
Regulations: Seat height, backrest height, angle adjustments of backrest and seat, adjust tilt function to body weight (Tilto), armrest height,
armrest width, armrest length and the position of brake
handle. Can be done without the need of tools.
Adjustments: Seat height can be adjusted beyond regulation without tools.
To Next Page
Loading...