Hermes RIO Series User Manual

Description of components within the indoor unit.

Description of components within the outdoor unit.

How to control the direction of the airflow using the SWING function.

Instructions for operating the unit in cooling mode.

Instructions for operating the unit in heating mode.

Setting the automatic ON timer for the air conditioner.

Setting the automatic OFF timer for the air conditioner.

Using the unit in fan-only mode for ventilation.

Operating the unit to reduce humidity.

Automatic mode that adjusts settings based on room temperature.

Activating sleep mode for comfortable night operation.

Guidelines for choosing a suitable location for the indoor unit.

Guidelines for choosing a suitable location for the outdoor unit.

Steps for securely attaching the mounting plate to the wall.

Procedure for creating the hole for pipes and wiring.

Connecting electrical wires to the indoor unit.

Connecting the refrigerant pipes to the indoor unit.

How to securely connect the pipes to the indoor unit.

Ensuring proper drainage of condensed water from the indoor unit.

Connecting electrical wires to the outdoor unit.

Connecting refrigerant pipes to the outdoor unit.

Removing air and moisture from the refrigerant circuit.

Checking the functionality of the indoor unit after installation.

Checking the functionality of the outdoor unit after installation.

Diagrams showing electrical connections for indoor and outdoor units.

Specifications for power supply and connection cables.

Cleaning and maintenance procedures for the indoor unit.

Instructions for cleaning the heat exchanger.

Maintenance tasks to perform at the end of the operating season.

How to replace batteries in the remote controller.