SYMBOLS
SYMBOLS
SYMBOLS
Apply or use brake fluid.
Measure in voltage range.
Measure in resistance range.
Measure in current range.
Use special tool.
Use fork oil.
Check for continuity.
LOCK
G
SEAL
Replace the part(s) with new one (s) before assembly.
Apply oil.Use engine oil unless otherwise specified.
Apply grease
Apply silicone grease.
Apply moly paste.
Apply sealant
Listed in the table below are the symbols indicating instructions and other information necessary for servicing and meaning
associated with them respectively.
DEFINITION
Torque control required. Torque data available in chapter 1 and in all chapters for refrance.
Apply a locking agent.
To Next Page
Loading...
