To Next PageTo Next PageWhat to do if my HERO HF-DAWN engine does not start?
If your HERO Motorcycle engine doesn't start, try the following: First, ensure the ignition is in the “ON” position. Next, check the fuel level in the fuel tank and inspect the fuel lines. Also, check the spark plug for fouling, and adjust or replace the spark plug if needed.
Why does my HERO Motorcycle have poor pick up?
If your HERO Motorcycle has poor pick up, it could be due to a loose spark plug in the cylinder head; in that case, tighten the spark plug. Also, check the air cleaner, brake binding and tyre inflation pressure.
How to fix no spark at the spark plug in my HERO HF-DAWN Motorcycle?
If there's no spark at the spark plug in your HERO Motorcycle, it might be due to an improper electrode gap. Check for a poorly connected or loose spark plug wire and secure it properly. Also, ensure the ignition switch is turned “ON”.
How to fix feeble horn sound or no light on my HERO HF-DAWN?
If you experience a feeble horn sound or no light on your HERO Motorcycle, try replacing the fuse, inspecting the battery, checking the bulbs, and verifying the connections.
What to do if my HERO HF-DAWN Motorcycle has starting trouble and the engine doesn't start?
If your HERO Motorcycle engine doesn't start, try these steps: First, ensure the ignition is in the “ON” position and that there is fuel in the fuel tank. Check the fuel lines and inspect the spark plug for fouling; replace or adjust it if necessary. Also, make sure the spark plug wire is securely connected. If the electrode gap is improper, ensure the spark plug gap is within 0.6-0.7 mm.
What to do if I have electrical system issues with my HERO HF-DAWN Motorcycle?
If you're experiencing electrical system issues with your HERO Motorcycle, begin by replacing the fuse. Inspect the battery, check the bulbs, and ensure all connections are secure.
General| Displacement | 97.2 cc |
|---|---|
| Rear Brake | Drum |
| Ignition | DC - Digital CDI |
| Clutch | Wet multi-plate |
| Front Suspension | Telescopic hydraulic shock absorbers |
| Front Brake Diameter | 130 mm |
| Rear Brake Diameter | 130 mm |
| Width | 720 mm |
| Height | 1045 mm |
| Wheelbase | 1235 mm |
| Ground Clearance | 165 mm |
| Engine Type | Air cooled, 4-stroke, single cylinder, OHC |
| Fuel Tank Capacity | 9.5 L |
| Starting | Kick Start |
| Transmission | 4 Speed Constant Mesh |
| Frame Type | Tubular double cradle |
| Rear Suspension | Swing arm with hydraulic shock absorbers |
| Front Tyre | 2.75 x 18 |
| Rear Tyre | 2.75 x 18 - 6 PR |
| Max. Power | 5.9 kW (8.0 PS) @ 8000 rpm |
Location and format of the VIN stamped on the vehicle.
Description of where the engine number is stamped on the crankcase.
Details engine performance metrics, spark plug, valve clearance, and idle speed.
Covers defensive riding, visibility, limits, and avoiding alcohol/drugs.
Emphasizes fitness, protective gear, and practicing vehicle handling.
Details essential protective apparel like helmets, eye protection, boots, gloves.
Recommended actions for safe riding: pre-ride checks, posture, signaling.
Actions to avoid: cell phones, sudden maneuvers, riding under influence.
Explains "ON", "OFF", and "RES" fuel valve positions for delivery/reserve.
Explains why pre-ride inspections are crucial for safety and preventing issues.
Lists essential checks: oil, fuel, brakes, tyres, clutch, chain, throttle.
Step-by-step guide for starting engine: ignition, fuel valve, choke.
Warns against running engine in closed areas due to exhaust gases.
Details normal and emergency braking, emphasizing simultaneous brake application.
Why maintenance is crucial for safety, economy, and pollution, plus safety precautions.
Safety measures during maintenance and when to seek professional help.
Explains schedule, intervals, and service codes (I, C, R, A, O, L, T, E).
Notes on service frequency, oil changes, chain adjustment, parts inspection.
Guides on checking spark plug condition, wear, and electrode gap.
Recommended engine oil brand, grade (SAE 10W 30 SL), and total capacity.
How to check oil level using the dipstick and when to top up.
Draining old oil, refilling with new oil, and circulation check process.
How to adjust engine idle speed using the throttle stop screw.
Checking and adjusting valve clearance for optimal engine performance.
Checking and adjusting drive chain slack for power transmission and wear.
Adjusting front brake lever free play and checking pad wear indicators.
Diagnosing and resolving engine start failures and stalling problems.
