P.04
Operating Instructions
1、Function button
● Mode Setting
The device has three operating modes: dehumidification mode, drying mode,
continuous dehumidification mode.
In the power on state, press the [mode] button, and the device will cycle through
the dehumidification and dry clothes continuous dehumidification modes. Each
time you press the mode key, the working mode will switch accordingly.
Dry clothes mode: humidity and wind speed cannot be set.
Dehumidification mode: humidity and wind speed can be set.
Continuous dehumidification mode: humidity cannot be set, wind speed can be
set.
● Humidity Setting
In the boot state, according to the "setting button", you can set the setting
humidity value, each click, set the humidity value increments 5RH%, set range
30 ~ 80RH%, can be set circularly. Long press "setting button", you can continuously
set the humidity value, no key operation seconds after the automatic withdrawal.
When the humidity value is set to 30 RH%, the continuous dehumidification
operation is carried out.
● Timer Setting
In the shutdown state, the timer is set to the timing boot, in the boot state,
the timer is set to the timing shutdown.
According to the "timing botton", you can set the timing time, each click, the
timing time increments 1H, set range: 1 ~ 24h, can be set circularly. Long press
the "timing key" seconds, can be continuous timing; timing time is 00, the timing
invalid.When the timing is effective, the timing “ ◦ ” light up; according to the "timing
botton",the display can display the remaining timing, and automatically display
the current humidity after a few seconds.
● Wind Speed Setting
There are two types of wind speed: high wind speed and low wind speed. Press
[wind speed] key in the power on state to switch one wind speed windshield,
recyclable. The humidity and wind speed cannot be set in dry clothes mode, and
the wind speed is automatically selected as high wind.
To Next Page
Loading...