Need help?Do you have a question about the Hewlett Packard Enterprise ProLiant DL360 Gen10 Plus and is the answer not in the manual?
Illustrates and labels components on the server's front panel for 8SFF and 4LFF.
Explains the status indicators and controls on the server's front panel for 8SFF and 4LFF models.
Identifies the ports and connectors located on the rear of the server.
Defines the status indicators on the server's rear panel.
Displays and labels the main components on the server's system board.
Shows the numbering scheme for drive bays in 8SFF, 8SFF+2SFF, and 4LFF configurations.
Defines LED indicators for LFF and SFF drive carriers.
Details fan configurations for single and dual processor server setups.
Describes ports and LED indicators on the DSC-25 network adapter.
Identifies components of the HPE NS204i-p NVMe OS Boot Device.
Explains LED status indicators for the HPE NS204i-p NVMe OS Boot Device.
Provides methods for powering on the server using the front panel or iLO.
Details procedures for safely powering down the server, including controlled and forced shutdowns.
Guides on sliding the server out from the rack for maintenance.
Instructions for safely removing the server from its rack mounting.
Steps to remove the server's chassis access panel for internal access.
Steps to reinstall the server's chassis access panel after maintenance.
Procedure for removing a hot-plug fan module from the server.
Instructions for removing the primary PCI riser cage assembly.
Procedure for installing the primary PCI riser cage assembly.
Steps to remove the secondary PCI riser cage.
Procedure for installing the secondary PCI riser cage.
Guides on removing the 8SFF drive backplane assembly.
Instructions for removing SFF and LFF drive blanks.
Steps to safely remove hot-plug drives from the server.
Describes how to release the server's cable management arm.
How to access and view the server's Systems Insight Display.
Information on HPE support services and their benefits for server management.
Guidelines for server placement in a rack to ensure adequate space and airflow.
Specifies the operating temperature range for safe and reliable server performance.
Details electrical regulations and considerations for server installation and operation.
Outlines the necessary steps for proper electrical grounding of the server.
Procedure for connecting a DC power cable to a DC power source safely.
Lists important safety warnings and cautions for server handling and operation.
Provides warnings and safety precautions related to rack installation and stability.
Information on product features, specifications, options, configurations, and compatibility.
General guidance for installing hardware options before server initialization.
Procedure for installing a redundant hot-plug power supply unit into the server.
Overview of backup power options like HPE Smart Storage Battery and Hybrid Capacitor.
Information on server memory support, including DIMM compatibility and population rules.
Details on Intel Optane persistent memory, including capacities and compatibility.
Procedure for installing high-performance fans required for specific server configurations.
Steps to install an 8SFF display port, USB, or optical drive blank option.
Procedure for installing a 4LFF display port or USB option module.
Details on the capabilities and supported expansion boards for the primary PCI riser cage.
Information on secondary riser cage options and their supported expansion boards.
Overview of supported storage controllers, including embedded, type-a, and type-p.
Information regarding processor and heatsink options and their installation procedures.
Procedure for installing the Systems Insight Display power module.
Steps for installing an OCP 3.0 adapter card into the server.
Procedure for installing the optional serial cable for server connectivity.
Steps to install the chassis intrusion detection switch for security.
Procedure for installing the Pensando DSP DSC-25 SFP28 network adapter.
Guides for installing the HPE NS204i-p NVMe OS Boot Device.
Instructions for installing and enabling the HPE TPM 2.0 Gen10 option.
General guidelines for connecting and disconnecting server cables safely and effectively.
Diagrams illustrating front panel I/O cabling for LFF and SFF drives, and front display/USB.
Provides detailed diagrams and tables for various SFF and LFF storage cable connections.
Lists software utilities and their operating modes: online, offline, or both.
Information on product features, specifications, options, configurations, and compatibility.
Describes AHSV as a tool for diagnosing and resolving server issues using AHS data.
Explains AHS's function in monitoring and recording server hardware and configuration changes.
Overview of iLO 5 as a remote server management processor for monitoring and control.
Details IP as a tool for server setup, OS installation, and firmware updates.
Discusses advanced security capabilities in HPE servers for protecting against unauthorized access.
Describes STK for automating unattended server installations for high-volume deployments.
Explains UEFI System Utilities for performing various configuration activities within the system ROM.
Details HPE SSA as the primary tool for configuring arrays on HPE Smart Array SR controllers.
Describes HPE InfoSight portal for monitoring devices using ML and predictive analytics.
General information on USB support in HPE Gen10 and Gen10 Plus servers.
Explains redundant ROM support for safe system ROM upgrades and configurations.
Details methods for updating system firmware and ROM, including SPP and SUM.
Information on SPP as a system software and firmware solution delivered as a single ISO file.
Describes SUM as a tool for maintaining and updating firmware, drivers, and system software.
Explains SUT for performing online firmware and driver updates using iLO.
Guidance on updating device drivers using Smart Update Solutions and HPE Support Center.
Recommendations for updating system software and firmware before initial server use.
Information on supported operating system versions and where to find the support matrix.
Explains NMI crash dump usage for diagnosing system hangs and unresponsiveness.
Lists available troubleshooting guides and resources for HPE ProLiant servers.
Details operating and non-operating temperature and humidity specifications.
Provides physical dimensions (height, depth, width) and weight specifications for SFF and LFF servers.
Lists available power supply models and their detailed specifications.
Information on calculating electrical and heat loading for hot-plug power supplies.
Guides on how to contact HPE support for live assistance and access documentation.
Information on accessing software updates, subscriptions, and managing entitlements.
Details on available remote support services for intelligent event diagnosis and resolution.
Links to view warranty information for various HPE server and networking products.
Information on safety, compliance, chemical substances, and environmental data for HPE products.
Instructions on how to provide feedback to improve product documentation.
General| Brand | Hewlett Packard Enterprise |
|---|---|
| Model | ProLiant DL360 Gen10 Plus |
| Category | Network Storage Server |
| Language | English |
To Next Page