Need help?Do you have a question about the Hexagon IRP60.00 and is the answer not in the manual?
General| Brand | Hexagon |
|---|---|
| Model | IRP60.00 |
| Category | Laboratory Equipment |
| Language | English |
Introduction to the operating instructions and importance of safety.
Critical safety information for safe and reliable system operation.
Details the product's compliance with EU directives and standards.
Specifies the validity period of the operating instructions.
Explains the intended use and functionality of the system components.
Identifies and illustrates the main hardware components of the system.
Lists the available components and configurations for system delivery.
General overview of the Infrared Touch Probe IRP60.00.
Provides detailed technical specifications and performance metrics.
Illustrates and lists the physical dimensions of the IRP60.00.
Diagram showing the transmission angles for the IRP60.00 probe.
Diagram showing the reception angles for the IRP60.00 probe.
Lists the order numbers and descriptions for spare parts.
Covers general operational procedures and requirements for the probe.
Lists necessary tools and equipment for operation and maintenance.
Step-by-step guide for replacing the stylus on the probe.
Procedure for attaching and detaching the probe shank.
Specific instructions for mounting shanks of diameter Ø28.
Instructions for safely replacing the battery in the probe.
Procedure for aligning the stylus to the spindle center for accurate measurements.
Explains the meaning of the LED indicators on the probe.
General overview of the Infrared Tool Setter IRT65.00.
Provides detailed technical specifications and performance metrics.
Illustrates and lists the physical dimensions of the IRT65.00.
Diagram showing the transmission angles for the IRT65.00 tool setter.
Diagram showing the reception angles for the IRT65.00 tool setter.
Lists the order numbers and descriptions for spare parts.
Covers general operational procedures and requirements for the tool setter.
Lists necessary tools and equipment for operation and maintenance.
Step-by-step guide for replacing the stylus on the tool setter.
Procedure for mounting the tool setter onto the base plate.
Instructions for safely replacing the battery in the tool setter.
Procedure for aligning the stylus for accurate measurements.
Details the process for calibrating the tool setter.
Explains the meaning of the LED indicators on the tool setter.
General overview of the Infrared Receiver IRR61.00.
Provides detailed technical specifications and performance metrics.
Illustrates and lists the physical dimensions of the IRR61.00.
Diagram showing the transmission angles for the IRR61.00 receiver.
Diagram showing the reception angles for the IRR61.00 receiver.
Lists the order numbers and descriptions for spare parts.
Covers general operational procedures and requirements for the receiver.
Procedure for mounting the IRR61.00 receiver.
Details how to connect the receiver to the system.
Provides pin assignments and wiring instructions for the receiver.
Explains the output circuit configuration of the receiver.
Explains the input circuit configuration of the receiver.
Illustrates signal flow and timing during system activation.
Procedure for activating and deactivating the measurement system.
Explains the meaning of the LED indicators on the receiver.
Details error codes indicated by LED flash patterns.
To Next Page