2. Safety rules
A. Power Supply Requirements
Input: 110 - 240 Volts AC
50-60 Hertz
Output: <15 VDC
IP54
Observe your electrical obligations for the installation of the power supply boxes of
220V / 110V (NFC15-100).
B. Water Requirements
The pool bottom vacuum cleaner PEPS is designed for cleaning the pool bottom under
the following water conditions:
• Temperature: 10o-35o C / 50o - 95o F
• Chlorine: Max 4 ppm
• pH: 7.0 - 7.8
• NaCl: Maximum = 4000 ppm
• No sulfur water
• Never use the robot in water with a salinity ≥ 4mg / l.
C. Rules for safe use
Never use the pool vacuum cleaner PEPS when anybody, especially children or
pets, is in the pool or basin. If people or pets are in the pool or basin, it is possible to
program the swimming pool bottom vacuum cleaner PEPS for use during the hours
when no one is in the pool or basin, for example, at night.
The pool bottom robotic vacuum cleaner PEPS can only be used, maintained and
repaired by persons who are familiar with its special features and the safety instructions.
Please read the user manual carefully and thoroughly familiarize yourself before using
the pool robotic vacuum cleaner PEPS. Do not allow people who are unaware of the
operation of the pool vacuum cleaner PEPS to use or approach it.
Do not place anything, except the radio remote control, on the pool bottom vacuum
cleaner PEPS or its electric box and its control panel.
www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55
5
To Next Page
Loading...