HGLRC FD MT VTX - User Manual

1
FD MT VTX Manual
1.Product specifications
Model:FD MT VTX
Input voltage:DC 6-26V
Output voltage:5V/2A
5V/PIT@70mA
5V/25mW@230mA/14dBm
5V/100mW@280mA/20dBm
5V/200mW@330mA/23dBm
5V/400mW@400mA/26dBm
5V/800mW@600mA/29dBm
Antenna interface:MMCX
Output power:PIT/25mW/100mW/200mW/600mW/800mW switchable
Frequency:5.8GHz 6 bands,48 channels
Size:37mm x 36.5mm x 6mm
Weight:7g
2. Function button settings
CH/FR button settings：
1. Click the button to switch channels, and the channel switches and cycles in the order of CH1, CH2,
CH3...CH8 on the basis of the current channel;
2. Press and hold the button for over 2 seconds , and the band switches and cycles in the order of A→B
→E→F→R→L on the basis of the current band;
Power：
1.Long press 5S to switch power;
2. Click the button to switch power. The power of this VTX is switched and cycled in the order of PIT→
25→100→200→400→800.

Summary

Product Specifications

Function Button Settings

CH;FR Button Settings

Controls channel and band switching via button clicks and long presses.

Power Control

Manages VTX power output levels through button presses.

Frequency Sheet

Power Indicator Status

Remote VTX Adjustment via OSD

Flight Controller Connection

Connects VTX RX to flight controller's UART TX for remote control.

Betaflight Settings

Configuration within Betaflight software for VTX control.

Port Configuration

Peripheral Setup

Configure serial ports, setting peripherals like VTX (IRC Tramp).

OSD Interface Description

OSD Menu Navigation

Navigating the On-Screen Display menu for settings like PIT, BAND, CHAN, POWER.

Important Notices

HGLRC FD MT VTX Specifications

General

Brand	HGLRC
Model	FD MT VTX
Category	Transmitter
Language	English