Operating Instruction Manual:
OM-HP-ALUMINIUM-01
Serial Numbers:
From: DF2001
1
OPERATING INSTRUCTION MANUAL
HP-MANUALLY OPERATED HYDRAULIC PUMP - ALUMINIUM
Hi-Force HP-Manually Operated Hydraulic Pumps (Aluminium) are designed to operate single and double
acting hydraulic cylinders and tools with a maximum working pressure of 700 bar (10,000 psi) This manual
applies to the Hi-Force HP-Manually Operated Hydraulic Pumps (Aluminium) ONLY. It contains the latest
product information available at the time of publication and approval. For information relating to the servicing
of HP-Manually operated hydraulic pump, see the servicing instructions, which are available on the Hi-Force
website. Hi-Force reserves the right to make changes to this document at any time without notice.
This ‘Original instructions’ document assumes that the operator carrying out any operation with this
product is trained and competent to do so. This manual does not attempt to cover all details or variations
in the equipment. Nor does this manual claim to provide for every possible contingency met in connection
with the installation, operation, or maintenance thereof. Should further information be desired, or should
a particular problem arise which is not covered in sufficient detail, the matter should be referred to
Hi-Force.
To Next Page
Need help?
General
