Hi Sharp Digital video recorder - Page 58

58
Remote Setup <Alarm>
Alarm No : Item to select Alarm No.
To set up all the camera equally, Choose “select all”
Enable Alarm : Item to select to use Alarm, Removing the check stops using that
channel.
Title : Item to type Alarm’s name.
Type : Item to select Alarm’s type.
- Normal Open : Type of alarm open in general situation.
- Normal Close : Type of alarm close in general situation.
1
1
Notice :
Type A only support 1 Alarm output
Type B support 4 Alarm output
Type C support 4 Alarm output