• DO NOT FORCE THE TOOL or attachment to do a job it is not designed to do.
• NEVER GRIND MORE THAN ONE WORKPIECE AT A TIME.
• DISCS CONTINUE TO SPIN AFTER TURNOFF eventually slowing to a stop.
• AVOID AWKWARD OPERATIONS AND HAND POSITIONS. Make sure you have good
balance while working on this machine. A sudden slip could cause your hand to move
into the disc.
• ALWAYS STAY ALERT. You must be focused while working on this machine. It is
possible for stones to catch on the discs and be ejected out of the grinding area.
MAINTENANCE SAFETY
• ALWAYS DISCONNECT POWER BEFORE SERVICING. Disconnect machine from
power source before making any adjustments and when not in use.
• DO NOT ABUSE CORD. Never carry the machine by the cord or yank it to disconnect
from receptacle. Keep cord away from heat, oil and sharp edges.
• DO NOT OPEN THE BLACK CONE BODY. There are no user serviceable parts inside.
• CLEAN AND DRY MACHINE AFTER USE.
SAVE THESE INSTRUCTIONS
4
To Next Page
Loading...
