Need help?Do you have a question about the Hi-Tech Diamond All-U-Need and is the answer not in the manual?
Safety guidelines for preparing and setting up the machine.
Essential safety precautions to follow while operating the machine.
Safety procedures for maintaining the equipment.
Initial disc for stock removal and shaping of hard materials.
Refines shape and removes scratches from the 180 mesh stage.
Further refines the workpiece and removes remaining scratches.
Prepares the stone for final polish by removing prior scratches.
Final polishing stage using a specialized pad and compound.
Procedure for lubricating the machine's arbor to prevent seizing.
Instructions for cleaning the machine after each use.
Composite discs used as backing for smoothing and polishing pads.
Pads for polishing various materials with different compounds.
Pads designed for a mirror finish, pre-charged with cerium oxide.
Cushioned pads placed under discs to help remove flat spots.
Discs with various grits for grinding and pre-polishing stones.
High-quality discs with electroplated diamonds for cutting and grinding.
Details on what the warranty includes and excludes.
Information on who is covered and the duration of the warranty.
Instructions on how to obtain warranty service and proof requirements.
General| Power | 1/4 HP |
|---|---|
| Voltage | 110V |
| Water Cooling | Yes |
| Dust Port | No |
| Speed | 1, 725 RPM |
| Disc Diameter | 8 inches |
To Next Page
