3
BEFORE FIRST USE
SET THE COFFEE BEAN BOX
SET AND USE THE AIR BLOWER
Before using the coffee grinder, wipe the housing and coffee bean box with a clean damp cloth. Wash the
coffee powder jar and the coffee powder jar lid in hot soapy water, then rinse and dry.
1. Make certain the coffee grinder is unplugged.
2. With your other hand, turn the Coffee bean
box counter-clockwise until the arrow is aligned
with the sign below and lift it up.
1. Make certain the top part of the conical burr is
clear of coffee grind residues. If not, you can use
the brush provided to clean around the top part
of the burr.
2. With your other hand, make sure the Coffee
bean arrow is aligned with the sign below on
housing, and turn the Coffee Bean Box clockwise.
NOTE: If the coffee bean box is not set properly
the coffee grinder won't start.
1.Put the air blower into the bean box.
Please note the A side should be placed face up,
like the picture below.
2.Cover the lid.
To remove the Coffee bean box
To set the air blower
To replace the Coffee bean box
3.Put your hand above the box lid, then
press it up and down to blow the coffee
powder out of the machine.
To Next Page
Loading...